Wellington (Puritan) Executive Fastener Kit 1001002

Weld Mount Executive Fastener Kit WEL-1001002

This kit contains a large selection of all the common Weld Mount parts and is an ideal kit for the full service yard or builder. The kit contains 2 tubes of our at-4020 white acrylic adhesive which will bond to almost all surfaces except low energy plastic or rubber. The adhesive sets in 12 minutes and is heat resistant to 280°. The glue shelf life is 1 year when stored at 72°. This is enough adhesive to bond the 300 fasteners which come in this kit. The Weld Mount System eliminates the need to drill into cored composites which can result in hull & deck delaminations. No need to drill and tap when used on metal surfaces. Great for mounting electronics, wire runs, bilge applications. Firewall wiring. Includes over 300 parts including stainless Stud s (#8-32, #10-24, 1/4-20), AT-3, & AT-5 wire tie mounts, mixing tips, Stud caps, strap mounts, and more.
Kit includes
50 pc. PS62-832-12 SS - 3/4" Long Panel Stud
25 pc. PS62-832-24 SS - 1-1/2" Long Panel Stud
10 pc. ST125-1024-12 SS - 3/4" Long Stud with #10 x 24 Threads 1.25" Base
10 pc. ST125-1024-24 SS - 1-1/2" Long Stud with #10 x 24 Threads 1.25" Base
5 pc. AT-113 - Large Footman's Strap
25 pc. AT-3 - Small White Cable Tie Mount
2 pc. AT-40200 - White Acrylic Adhesive with 10 Minute Kick
10 pc. ST125-1420-24 SS - 1-1/2" Long Stud with 1/4" x 20 Threads 1.25" Base
10 pc. ST125-1420-16 SS - 1" Long Stud with 1/4" x 20 Threads 1.25" Base
50 pc. AT-5 - Large White Cable Tie Mount
10 pc. ST125-1420-32 SS - 2" Long Stud with 1/4" x 20 Threads 1.25" Base
10 pc. ST125-1420-40 SS - 2-1/2" Long Stud with1/4" x 20 Threads 1.25" Base
15 pc. SC-1420 - White Stud Cap for All 1/4" x 20 Stud s
30 pc. AT-450 - 3" Mixing Tips for AT-4020 Adhesive
10 pc. SOB125-1420-16SS - 1" Tall Standoff with 1/4" x 20 Threads 1.25" Base

SKU: WEL-1001002
Category: Electrical > Cable Ties & Mounts