K & N Engineeriing K&N Air Filter Univ 70Mm Rd KNE RU3190
$56.99
Out of stock
SKU
JMS273236
K & N Engineeriing K&N Air Filter Univ 70Mm Rd KNE RU3190
K & N Engineeriing K&N Air Filter Univ 70Mm Rd KNE RU3190
All filters are constructed with ultra-strong molded pliable rubber flanges which absorb vibration, allow for secure attachment, and can also be stretched up to 1/16" (1.5mm) to fit in-between sizes. Note: All filters come with Rubber End TANK CAP unless noted.- Mounting Flange Inside Diameter - This is the most critical dimension and should be very close to the diameter of the application's inlet flange. The flange will stretch up to 1/16" for those in-between sizes
- Filter Diameter - This is the overall diameter of the filter. Always use the largest diameter practical to insure maximum filtration
- Filter Length - This dimension is the length of the filter body only, it does not include the flange length. Always use the longest filter practical for maximum filtration
- Flange Angle and/or Length - If no angle is listed in the specification table, the flange is straight. Any angle listed is in degrees and can be utilized when space is a problem
- Flange Type - The location of the flange in relation to the OD of the filter is sometimes offset to one edge of the filter for more clearance in an application
Flange: 2.75"(70mm) ID x 2"(51mm) L
Filter: 4"(102mm) OD x 6"(152mm) L
Angle: 20°
SKU: KNE RU3190 501-RU3190
Manufacturer: K & N ENGINEERIING
Category: Snow Carburetion & Fuel/Air Filters
UPC Code | 024844019608 |
---|---|
Manufacturer Part Number | RU-3190 |
Manufacturer | K & N ENGINEERIING |
Write Your Own Review