Shields Shieldsflex II Water/Exhaust Hose With Wire Series 250

Shields Shieldsflex II Water/Exhaust Hose With Wire Series 250

Use for engine intake and wet exhaust connections where bends or long lengths are required. Also good for bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent and pump out. Black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water, abrasion and odor permeation. Temperature range: -20 Deg. F to 200 Deg. F continuous, +250 Deg. F intermittent. Meets SAE J2006 Type R2.

SKU	ID	OD	Length
SHI-2500124	1/2"	27/32"	12-1/2'
SHI-2500340	3/4"	1-1/16"	50'
SHI-2500344	3/4"	1-1/16"	12-1/2'
SHI-2500584	5/8"	61/64"	12-1/2'
SHI-2500784	7/8"	1-3/16"	12-1/2'
SHI-2501000	1"	1-5/16"	50'
SHI-2501004	1"	1-5/16"	12-1/2'
SHI-2501120	1-1/2"	1-53/64"	50'
SHI-2501124	1-1/2"	1-53/64"	12-1/2'
SHI-2501140	1-1/4"	1-19/32"	50'
SHI-2501144	1-1/4"	1-19/32"	12-1/2'
SHI-2501184	1-1/8"	1-7/16"	12-1/2'
SHI-2501344	1-3/4"	2-1/8"	12-1/2'
SHI-2501384	1-3/8"	1-23/32"	12-1/2'
SHI-2501584	1-5/8"	2"	12-1/2'
SHI-2501784	1-7/8"	2-19/64"	12-1/2'
SHI-2502000	2"	2-13/32"	50'
SHI-2502004	2"	2-13/32"	12-1/2'
SHI-2502124	2-1/2"	2-7/8"	12-1/2'
SHI-2502144	2-1/4"	2-11/16"	12-1/2'
SHI-2502184	2-1/8"	2-17/32"	12-1/2'
SHI-2502344	2-3/4"	3-3/16"	12-1/2'
SHI-2502384	2-3/8"	2-3/4"	12-1/2'
SHI-2502584	2-5/8"	3-1/16"	12-1/2'
SHI-2502784	2-7/8"	3-5/16"	12-1/2'
SHI-2503001	3"	3-7/16"	6-1/4'
SHI-2503004	3"	3-7/16"	12-1/2'
SHI-2503124	3-1/2"	4"	12-1/2'
SHI-2503184	3-1/8"	3-5/8"	12-1/2'
SHI-2504004	4"	4-5/8"	12-1/2'
SHI-2504124	4-1/2"	5-3/32"	12-1/2'
SHI-2505004	5"	5-5/8"	12-1/2'
SHI-2506004	6"	6-21/32"	12-1/2'

Category: Plumbing/Engine-Water-Exhaust Hose/Shieldflex II Water-Exhaust