Attwood Bilge Pump Installation Kit w/Switch, 3/4" Hose Clamps & 20' Wire Fuse Holder 41165

Bilge Pump Installation Kit
Part #: 4116-5

Complete kit to install manual bilge pump with 3/4" or 1-1/8" I.D. hose outlet.

Features:

• (1) 2-way on/off switch with bezel plate
  
• (1) 3/4" I.D. x 5' corrugated hose
  
• (1) Thru-hull fitting for 3/4" I.D. hose
  
• (2) Snap-It hose clamps
  
• (2) 2-conductor 16-gauge wire, 20' long
  
• (1) In-line fuse holder with two-amp fuse

Caution: Bilge pump switches are not external-ignition protected.

Gallons Per Hour = NONE | Gallons Per Minute = NONE | Operation = Non-Automatic | Outlet Size = NONE | Power - Max Continuous (Amps) = NONE | Volts = NONE

Category: Marine Plumbing & Ventilation | Bilge Pumps